Suspension Steering Center Link Ball Joints Rack Ends Idler Arm Blazer S10 2WD

For CHEVROLET S10 BLAZER 1983 TO 1994 Front Left Right Inner Outer Tie Rod Ends Upper Lower Ball Joints Center Link Idler Arm Kit. To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part. FRONT LEFT RIGHT OUTER TIE ROD ENDS. FRONT LEFT RIGHT INNER TIE ROD ENDS. FRONT LEFT RIGHT TIE ROD END ADJUSTING SLEEVE. FRONT LEFT RIGHT UPPER BALL JOINTS.

FRONT LEFT RIGHT LOWER BALL JOINTS. We Work parts from many suppliers, some parts have grease fittings while others are factory sealed. Both types of parts are equally dependable. If the parts is available with grease zerk will be sent, if NOT is available with grease will be sent as is.

We will notify if the grease Fittings is available. The parts may vary in color but the color doesn't affect the application or quality of the product. In the case of update or address changes made after the completion of an order, the customer will have to contact.

To notify us of the updates/changes. We will be more than happy to research and we make sure you are getting the right parts. We do not want sell to you something that will not work. Please take care inspect items prior to installation.

This includes prior to delivering them to a third party for installation. Or refuse credit on parts that have been installed or attempted to install. Improper installation by the customer or any third party. All parts must be installed by a certified mechanic or certified specialist.

We send to 48 states on the United States. Parts must be in new, salable condition. If a part arrives damaged, or is defective, it is our responsibility to take care of it but it must be reported to us immediately.

Steering and Suspension units are complex system made up of a variety of independent components. When replacing steering and/or suspension components that may affect an alignment angle, you are required to check and adjust alignment as needed. The item "Suspension Steering Center Link Ball Joints Rack Ends Idler Arm Blazer S10 2WD" is in sale since Tuesday, June 16, 2015. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Tie Rod Linkages".

The seller is "na-parts" and is located in Miami, Florida. This item can be shipped worldwide.

Brand: Autopart International
Manufacturer Part Number: D1047
Other Part Number: ES2033 ES2034 ES2032 DS1047 K6187 K5208 K6145
Placement on Vehicle: Left
Surface Finish: Standard Gmc Chevrolet 4X2 RWD Sonoma Hombre
Warranty: 1 Year
Kit or Single Part: Kit
Included Hardware: Mounting Hardware
Kit Parts Included: 2 Outer Tie Rod End
Fitmen 1: Chevrolet Blazer 1989-2005
Fitmen 2: Chevrolet S10 Blazer 1983-1994
Fitmen 3: Chevrolet S10 Pickup 1982-2003
Fitmen 4: GMC Jimmy 1992-2001
Fitmen 5: GMC S15 Jimmy 1983-1991
Fitmen 6: GMC S15 Pickup 1982-1990
Fitmen 7: GMC Sonoma 1991-2003
Fitmen 8: Isuzu Hombre 1996-1999
Interchange Part Number: ES2033 ES2034 ES2032 DS1047 K6187 K5208 K6145
Fitment Type: Direct Replacement